How to Fix Xiaomi Phone Touchscreen Not Responding or Glitching

Fix xiaomi touchscreen not working and redmi screen unresponsive. Solve poco touch issue and hyperos touch glitch with xiaomi screen fix.

A touchscreen that doesn't respond or registers phantom touches is incredibly frustrating. Here's how to diagnose and fix it on any Xiaomi, Redmi, or POCO phone.

Step 1: Force Restart the Phone

Hold the Power button for 10–15 seconds. A frozen software process is the most common cause of touch unresponsiveness.

Step 2: Check Your Screen Protector

Thick, low-quality, or bubbled screen protectors can block touch input — especially on curved AMOLED displays. Remove the screen protector temporarily and test the touch response.

Step 3: Disable Gloves Mode (if accidentally enabled)

Go to Settings > Additional Settings > Pointer Speed — or search for "Gloves Mode" in Settings. If Gloves Mode is on, touch sensitivity is amplified, causing phantom touches. Turn it off.

Step 4: Check for Display Settings Issues

Go to Settings > Display > Touch Sensitivity and verify it's set to Standard (not High or Low unexpectedly).

Step 5: Run the Built-in Touch Test

Dial *#*#64663#*#* (or *#*#6484#*#*) in the Phone app. This opens Xiaomi's hardware test menu. Select Touch Panel to test all areas of the screen.

Step 6: Wipe Cache Partition

Boot into Recovery Mode (Power + Volume Up) and wipe the cache partition. This resolves software-caused touch bugs.

Step 7: Factory Reset

If the touchscreen issue persists after all software fixes, and the screen test shows areas that don't register touch, you likely have a hardware failure. A factory reset can rule out software — if the issue remains after reset, visit a Xiaomi service center for screen replacement.