How to Fix Xiaomi Phone Volume Buttons Not Working
Low call sound or no earpiece audio on a Xiaomi phone is usually caused by volume settings, blocked speaker mesh, Bluetooth routing, app conflicts, or a HyperOS software glitch. To fix xiaomi call audio low issues, check in-call volume first, then test audio routing, clean the earpiece area, update HyperOS, and rule out hardware failure with a CIT or hardware test.
Steps
- Raise in-call volume during an active call.
Press the volume up key only after the call connects. Media volume and ringtone volume do not control earpiece volume Xiaomi uses during calls.
- Check audio output routing.
Turn off Bluetooth and disconnect earbuds, car systems, or smartwatches. Audio may be routed away from the earpiece even when the phone screen shows a normal call.
- Clean the earpiece and remove case interference.
Dust, pocket lint, and thick screen protectors often muffle the top speaker. Use a soft dry brush and make sure no case edge covers the earpiece slot.
- Restart and update HyperOS.
A temporary audio service bug can reduce or mute call sound. Install pending system updates if the goal is to fix call sound HyperOS problems after a recent patch or version change.
- Test hardware in Safe mode or service menu.
Safe mode helps detect app conflicts from dialers, sound boosters, or call recorders. If available on the model, use Xiaomi hardware diagnostics or CIT testing to check the receiver speaker.
Common Issues and Fixes
- Very low earpiece sound during calls — likely caused by low in-call volume or clogged mesh — raise call volume during a live call and clean the receiver grille.
- No sound only on some calls — likely caused by poor network, VoLTE glitch, or app-based calling issues — switch between VoLTE, Wi-Fi calling, or standard calling and test again.
- Call audio goes to another device — likely caused by Bluetooth auto-connect — disable Bluetooth, forget unused devices, and retry the call.
- No sound after HyperOS update — likely caused by a software bug or corrupted audio settings — restart, clear Phone app cache, and install the next available update.
- Speakerphone works but earpiece does not — likely caused by receiver hardware failure — confirm with hardware diagnostics and seek repair if the test fails.
| Option | Best For | Limitation |
|---|---|---|
| In-call volume check | Sudden low call sound | Only helps if volume is the cause |
| Bluetooth off test | Audio routed elsewhere | Does not fix hardware faults |
| Safe mode | App conflict detection | Temporary diagnostic only |
| HyperOS update | Post-update sound bugs | Depends on patch availability |
| CIT hardware test | Receiver speaker failure | Not available on every model |
Quick Tips
🤔Note:
Calls made through WhatsApp, Telegram, or similar apps use separate audio handling and may fail even when regular calls work.
💡Protip:
Screen protectors placed too high can partially block the earpiece and mimic a hardware issue.
🤔Note:
Mono audio, hearing settings, or accessibility sound adjustments can affect perceived balance or volume.
💡Protip:
Factory reset should be a last step because call audio problems caused by hardware usually remain after reset.
Why is Xiaomi call audio low only on normal calls?
A carrier feature issue such as VoLTE or Wi-Fi calling can affect standard calls while apps still sound normal. Testing with both features off helps isolate the cause.
Why does speakerphone work but the earpiece has no sound?
The bottom loudspeaker and top earpiece are separate parts. Working speakerphone with silent receiver audio usually points to receiver blockage, routing errors, or earpiece hardware failure.
🔍More Info:
1. Complete Guide on How to Restore iPhone from IPSW2. Bring Back Your Lost Data: 3 Best iPhone Backup Extractors
3. Top 5 Free iPhone Wallpaper Apps to Spice Up Your Screen
4. Everything to Know About Voicemail Setup on iPhone 15
5. 3 Quick Tutorials on How to Undo Passcode on iPhone 15
