Copied! Now you can share this post to any social media platform.

How to Use TWRP Custom Recovery on Xiaomi Phone

A Xiaomi phone stuck on Downloading, Do Not Turn Off usually means a failed system update, interrupted firmware install, or a temporary boot process freeze. The safest fix is to wait briefly, force restart the device, then use Recovery mode to clear cache or reboot. A factory reset is the last resort if the xiaomi downloading do not turn off stuck screen does not clear.

Steps
  1. Wait 10 to 20 minutes first. A large OTA update can stay on the downloading screen longer than expected, especially on older Xiaomi models or slow storage.

  2. Force restart the phone. Hold the Power button for about 10 to 20 seconds until the screen turns off and the Xiaomi logo appears. On some models, Power + Volume Down may help trigger a restart.

  3. Boot into Recovery mode. Turn the phone off. Then hold Power + Volume Up until Recovery appears. Select Reboot first. If normal boot fails again, continue with cache-related options if available.

  4. Use Safe Mode or Recovery reset if boot loops continue. If the phone still returns to the same screen, choose Wipe Data only after confirming that standard reboot options failed. A reset can fix a fix update stuck Xiaomi case caused by corrupted update files.

  5. Charge and retry update later. After the phone boots normally, charge above 50%, connect to stable Wi-Fi, free storage space, and install the update again.

Common Issues and Fixes
Issue Likely Cause Fix
Phone stays on the same screen for over 30 minutes Frozen OTA process Force restart, then try Recovery reboot.
Phone reboots back to Downloading, Do Not Turn Off Corrupted update package Enter Recovery and wipe data if repeated reboots fail.
Recovery mode does not open Wrong button timing or low battery Charge for at least 30 minutes, then retry Power + Volume Up.
Update fails after restart Low storage or unstable internet during download Clear storage, reconnect to stable Wi-Fi, and redownload the update.
Device becomes stuck after manual ROM flashing Incompatible firmware build Reflash the correct ROM version for the exact Xiaomi model.
Quick Tips
  • Avoid repeated key presses. Repeated input during the update screen can interrupt normal boot behavior.
  • Let the phone cool down. A very hot device can freeze during update processing, so wait several minutes before restarting.
  • Update text can vary by model. Some Xiaomi models show similar text during repair or firmware verification, not only during standard updates.
  • Delay factory reset if possible. If important files are not backed up, avoid an immediate reset unless all reboot options have failed.
🤔Note:

If the stuck screen appears during a normal OTA update, waiting at least 10 to 20 minutes before forcing a restart is usually the safest first step.

Related Questions
Can a Xiaomi update stuck screen fix itself?

Yes, if the update is still processing normally. Waiting at least 10 to 20 minutes is reasonable before forcing a restart.

Will a factory reset remove the stuck downloading screen?

Often yes, but only if the issue is caused by damaged system data. A factory reset also erases local files and settings.

💡Protip:

If the phone becomes accessible but important files need to be copied off before deeper repair steps, a device management tool such as Dr.Fone can help with backup or file export first.

Did this post answer your question?
Submitted Successfully!
Your Complete Mobile Solution