How to Recover Photos from Broken Xiaomi Phone Screen

A Xiaomi phone proximity sensor not working during calls is usually fixed by removing anything blocking the top sensor area, turning off accidental touch features that conflict with calls, updating MIUI or HyperOS, and running proximity calibration if the model supports it. If the screen stays on during calls, Xiaomi devices often need a case, screen protector, or software setting checked first.

🤔Note:

The proximity sensor is usually located near the top front earpiece area, so even a slightly misaligned screen protector or thick case edge can affect call behavior.

Steps

Clean and uncover the sensor area

Remove the case and screen protector temporarily. Clean the top front area near the earpiece, because dust, thick glass, or black borders often block the sensor.
Restart and test in a normal call

Restart the phone, then place a regular phone call. Move a hand over the top sensor area and check whether the screen turns off and on correctly.
Check call and display settings

Open call settings and look for options related to proximity sensor, accidental touch prevention, pocket mode, or raise to wake. Disable conflicting features briefly, then test again.
Run CIT or hardware test menu

Open the Xiaomi hardware test menu if available and test the proximity sensor value. If the reading never changes when the sensor is covered, the issue is likely calibration failure or hardware damage.
Update system software or reset settings

Install the latest MIUI or HyperOS update. If the issue started after an update, reset phone settings or perform proximity calibration through the hidden service menu if the model includes it.

Common Issues and Fixes

Issue	Likely Cause	Fix	Considerations
Screen stays on during calls	Blocked sensor area	Remove tempered glass, thick case lip, or dirt near the earpiece	Check physical obstruction first before changing software settings
Proximity sensor fails after screen replacement	Misaligned sensor window or non-original parts	Reseat the display through a repair shop or replace the incompatible part	Hardware alignment problems usually need professional inspection
Sensor works sometimes only in bright light	Software calibration error	Use proximity calibration from the test menu and reboot after saving	Calibration availability depends on model and software version
No proximity option in settings	Model uses automatic handling	Test through CIT menu and update firmware instead of searching for a missing toggle	Many Xiaomi phones do not expose a manual proximity switch
Issue started after update	MIUI or HyperOS bug or corrupted settings	Clear Phone app data, reset settings, and install the next patch if available	Software issues may improve after later updates

💡Protip:

Always test the sensor during a standard ear-call, not only on speaker mode, because some Xiaomi models use different virtual proximity behavior when speakerphone is enabled.

Quick Tips

Screen protector choice: A full-screen protector with a dark top border often causes more problems than clear-edge glass.
Testing method: Some Xiaomi models use virtual proximity behavior during speaker mode, so testing should be done in standard ear-call mode.
Calibration support: Proximity calibration may be unavailable on certain models even when forum posts mention it.
Hardware test result: If the sensor value does not change in the hardware test, a factory reset rarely fixes a physical sensor failure.

How to open Xiaomi proximity calibration?

Some Xiaomi models allow proximity calibration through the CIT or hardware test menu. Availability depends on the model and software version.

Why is the screen on during call Xiaomi phones after a display change?

The most common reason is poor sensor alignment or an incompatible replacement screen. A repair inspection is usually needed if cleaning and settings checks do not help.

Try It Online Try It Online Try It Online Try It Online Try It Free Try It Free Try It Free Try It Free