Copied! Now you can share this post to any social media platform.

How to Enter and Use Fastboot Mode on Xiaomi Phone

Xiaomi recovery mode on a HyperOS phone is usually entered by powering the phone off completely, then holding Volume Up + Power until the Xiaomi or Redmi logo appears. Release the buttons when the HyperOS recovery screen loads. Navigation in recovery mode is commonly done with the volume buttons and power key.

Steps
  1. Power off the Xiaomi phone fully.

    Wait a few seconds after the screen turns black to confirm a complete shutdown.

  2. Press and hold Volume Up and Power together.

    Keep both buttons pressed until the Xiaomi, Redmi, or POCO logo appears.

  3. Release the buttons when the HyperOS recovery menu opens.

    If the phone starts normally, repeat the process and hold the buttons slightly longer.

  4. Use the xiaomi volume button recovery controls to move through options.

    Volume Up and Volume Down usually move the selection, and the Power button confirms an option.

  5. Select the needed action carefully.

    Common options include reboot, wipe data, or connect with recovery-related tools depending on the model.

Option Best For Limitation
Reboot Exiting recovery safely Does not fix system faults
Wipe Data Severe software issues Erases local data
Safe reboot attempt Minor boot loops May not solve deeper corruption
Recovery menu only Diagnostics and maintenance Limited repair options
Common Issues and Fixes
  • Recovery mode does not open: likely cause: shutdown was incomplete or buttons were released too early — fix: power off again fully and hold Volume Up + Power longer.
  • Fastboot opens instead of HyperOS recovery: likely cause: wrong button combination — fix: use Volume Up + Power, not Volume Down.
  • Phone boots normally: likely cause: button timing was missed — fix: press both buttons at the same time before the logo appears.
  • Touch does not work in recovery: likely cause: many Xiaomi recovery menus are button-based — fix: use volume keys for navigation and Power to confirm.
  • Recovery asks for a password or fails to decrypt data: likely cause: device encryption or system errors — fix: reboot first, then consider data wipe only if access remains blocked.
Quick Tips
  • Battery level: A low battery can interrupt entry into hyperos recovery. Charging for at least 15–20 minutes can help.
  • Model differences: Some Xiaomi, Redmi, and POCO models show slightly different recovery menu names, but the entry method is usually the same.
  • Hardware check: A damaged volume button can prevent xiaomi recovery mode access even when the software is fine.
  • Data warning: Wipe or factory reset options remove local files, apps, and settings stored on the device.
Related Questions
Is recovery mode the same as Fastboot mode?

No. Recovery mode is for maintenance actions like rebooting or wiping data, while Fastboot is mainly for flashing and deeper device-level operations.

Can recovery mode fix a Xiaomi boot loop?

Sometimes. A simple reboot from recovery may help minor startup issues, but persistent boot loops often require cache clearing, a reset, or software repair.

💡Protip:

Before using wipe options, a phone management tool such as Dr.Fone can be useful for backup, file export, or device handling if the phone still connects normally outside recovery.

Did this post answer your question?
Submitted Successfully!
Your Complete Mobile Solution