How to Restore Xiaomi Phone from Mi Cloud Backup

A Xiaomi phone touchscreen not responding is usually caused by a temporary system freeze, a bad screen protector, moisture, low-temperature behavior, or a HyperOS touch issue after an update. Fix touch screen Xiaomi problems by forcing a restart, removing external interference, testing in Safe mode, and checking whether the fault is software-based or hardware-based.

Steps

Force restart the phone. Hold the Power button, or Power + Volume Up on some Xiaomi models, until the device restarts. A forced reboot often clears a temporary xiaomi touchscreen not working state.
Remove the case, screen protector, and moisture. Thick tempered glass, damaged protectors, trapped dust, or wet fingers can block touch input. Clean the display fully and test the bare screen.
Charge the phone and let it cool or warm to room temperature. Very low battery, overheating, or cold conditions can cause delayed or dead touch response. Leave the phone idle for 10 to 15 minutes before testing again.
Boot into Safe mode if touch works intermittently. Safe mode helps identify whether a third-party app is causing a HyperOS touch issue. If touch works normally there, uninstall recently added launchers, cleaners, or gesture apps.
Update or reset software only after backup. Install the latest HyperOS or MIUI patch if available. If the problem started after an update and remains severe, a factory reset can rule out software corruption.

Common Issues and Fixes

Screen responds only in some areas — likely cause: cracked digitizer or internal display damage — fix: test with touch diagnostic tools in CIT mode; seek screen replacement if dead zones remain.
Touch stops after a HyperOS update — likely cause: firmware bug or corrupted cache — fix: update to the newest patch, restart, and reset only if the issue continues.
Ghost touches or random taps — likely cause: charger interference, moisture, or poor-quality screen protector — fix: unplug the charger, dry the phone, and remove the protector.
No touch response after a drop — likely cause: loose display connector or digitizer damage — fix: avoid repeated pressing; professional repair is usually required.
Touch works except on lock screen — likely cause: system app conflict or lock screen bug — fix: reboot, test Safe mode, and clear system launcher or lock screen app data if accessible.

Quick Tips

A Bluetooth mouse via OTG can help back up data when the display shows image but touch is dead.
Fast charging adapters sometimes trigger unstable touch behavior; test with another cable and charger.
If screenshots and buttons still work but touch does not, the display panel may be fine while the digitizer has failed.
Factory reset is not a hardware fix; reset only after basic tests confirm a likely software cause.

Option	Best For	Limitation
Force restart	Frozen screen	Temporary fix only
Safe mode	App conflict check	Not useful if touch is fully dead
System update	HyperOS touch issue	Depends on patch availability
Factory reset	Software corruption	Erases data
Repair service	Drop or water damage	Hardware cost

Why is the Xiaomi screen not responding but buttons still work?

Button input and touch input use different components. Working buttons with a dead screen often point to digitizer failure or a software touch driver issue.

Can a screen protector cause Xiaomi touchscreen not working?

Yes. Thick, cracked, or poorly aligned glass can block edge touches, delay gestures, or create dead spots. Testing without the protector is a quick way to confirm the cause.

💡Protip:

If touch is partially usable, backing up photos, chats, and files before reset or repair reduces data loss risk. A phone management tool such as Dr.Fone can help export or safeguard data when the touchscreen still works intermittently.

Try It Online Try It Online Try It Online Try It Online Try It Free Try It Free Try It Free Try It Free