iPad Won't Connect to Wi-Fi? 10 Solutions!

Part 1: Basic Tips to Fix iPad Not Connecting to Wi-Fi?

There are multiple reasons behind your Wi-Fi not working on your iPad. It depends on device to device. However, here are some common factors that your iPad won't connect to Wi-Fi:

• iPad not in the coverage area: Your iPad can't connect to Wi-Fi if you have taken your device in a space with a low Wi-Fi range.
• Network issues: If there is any problem with your Wi-Fi connection, your iPad won't connect to the network. There might be a problem with ISP or router itself.
• Accidently blocklisted iPad: Sometimes, W-Fi won't work on the iPad if you blocklist the device on the router.
• Public Wi-Fi network connection: If you try to connect your device with public Wi-Fi network, it might cause a connection issue. It is because some of these networks need an additional verification layer.
• Internal issues with the iPad: There might be a problem with the operating system of the iPad. Its OS modules restrict your device from making a successful connection with Wi-Fi.
• Network conflicts: If you change the network settings or preferences, it can create some conflicts. As a result, your iPad won't connect to Wi-Fi.
• Usage of Thick iPad Protective Case: Sometimes, users use iPad cases containing thick layers. It can cause an issue with Wi-Fi signals or antennae.
• Firmware issues: If you use an outdated firmware version on a router, your new generation iPad can't connect to W-Fi.

Whatever the problem is, here are some solutions to troubleshoot the iPad not connecting to Wi-Fi problem:

Solution 1: Make Sure the Router is On

The iPad won't connect to Wi-Fi if the router is offline. So, power on the router and move the iPad close to the router to get strong signals.

Once you turn on the router, your iPad can't stay connected to the network, plug in the cable firmly into the router to make a solid connection.

Solution 2: Move Close to Router

Check the distance between the router and iPad. IF your iPad is too far from the router, it will not establish the connection successfully. So you must use your Apple device with the router range. The required router range to make a strong Wi-Fi connection varies from router to router. However, the standard range should be approximately 150 feet to 300 feet.

Solution 3: Remove the iPad Case

If your iPad is close to the router and you still have an issue with the Wi-Fi connection, check what kind of iPad case you are using. Sometimes, a thick iPad case can create a problem. Take off your iPad case and see if the device can easily maintain the connection. However, you can search for a thin iPad case to protect it and use it hassle-free.

The following are the steps to remove the iPad case:

Step 1: Pull the magnetic latch to open the folio cover.

Step 2: Hold the iPad with its back facing you. On the upper-left-hand side of the iPad, keep the finger gently on the camera lens. Then, push the device by the camera hole.

Step 3: Once you free the upper-left-hand side, gently peel the case's upper-right-hand side from the device.

Step 4: Repeat the same process on the remaining lower sides. Make sure to peel the case from the iPad gently. Do not tug or pull forcefully.

Step 5: Once the corners are free, carefully remove the iPad from the case.

Solution 4: Make Sure Wi-Fi is On

Sometimes, minor software problems prevent the iPad not connecting to Wi-Fi properly. So, check the router and see if the Wi-Fi lights are on. Suppose there is a connection between iPad and Wi-Fi, but there is no internet connection. There might be an issue because of improper working of the router.

You can simply fix this issue by restarting your Wi-Fi. Here are the steps to turn on the Wi-Fi again:

Step 1: Open the "Settings" on the iPad.

Step 2: Find the " Wi-Fi " option on the sidebar and tap on it.

Step 3: Now, look for the "Wi-Fi" toggle button on the top-right-hand side.

Step 4: Press on the "Wi-Fi" button to turn it off.

Step 5: Then, wait for some time and click on the same button again. It will restart the Wi-Fi.

Solution 5: Check Password of Wi-Fi

When you join a network, you cannot make a Wi-Fi connection. It might happen if you enter the incorrect password. It is hard to remember passwords with a combination of letters and numbers. So, cross-check to make sure that you entered the correct password.

Part 2: Still Can't Connect to Wi-Fi? 5 Solutions

If you have tried all the solutions to fix the "iPad can't connect to Wi-Fi" issue. But none of them worked. Try the fixes listed below:

Solution 6: Restart iPad

If restarting the Wi-Fi solution didn't work, don't work. Instead, try to restart your iPad. Sometimes, the iPad's software crashes, restricting it from connecting with Wi-Fi networks.

To restart the iPad with the "Home" button, follow the steps listed below:

Step 1: If there is a "Home" button on your iPad, press and hold it until the "slide to power off" message appears on the screen.

Step 2: Swipe the "power" icon from left to right. It will shut down the iPad. Wait for a few seconds.

Step 3: Tap and hold the "power" button again. It will turn on the iPad.

If your iPad doesn't have a home button, then go through the steps listed below:

Step 1: Hold the top button of your iPad.

Step 2: At the same time, hold the volume buttons and wait till the power off slider appears on the screen.

Step 3: Slide that slider on the screen to switch off the iPad.

Step 4: Wait for a few seconds.

Step 5: Again, hold the top button until the Apple logo appears on the iPad's screen.

Step 6: Once your iPad restarts, try to connect it again with Wi-Fi.

Solution 7: Restart Router

Sometimes, when you enter the password, you can receive the message "Unable to join the network" or "No Internet Connection." You can fix this issue easily by restarting the router.

To restart the router, unplug it for seconds. Then, plug it back in again. It would be best to disable the Wi-Fi and re-enable it on your device simultaneously.

Solution 8: Forget Wi-Fi Network and Reconnect

If you have tried all the above solutions, but still your iPad won't connect to Wi-Fi, then forget the respective network. Then, after some time, reconnect to the same Wi-Fi network again. If you receive frequent prompts to enter the correct password, this solution will work.

To forget and reconnect the Wi-Fi network, follow the steps listed below:

Step 1: Go to iPad "Settings".

Step 2: Select the "Wi-Fi" option.

Step 3: Click on the blue" i" next to the network name

Step 4: Hit on the "Forget This Network" option.

Step 5: Tap on the "Forget" button.

Step 6: Wait for a few minutes. Then, rejoin the network by entering the correct password.

Solution 9: Reset iPad's Network Settings

If you reset the network settings on the iPad, it will return all the wireless network settings to the device's factory settings. By implementing this method, you can effectively erase all the Wi-Fi network profiles from your iPad. It will also remove corresponding configuration information from your device. However, other settings and personal profiles will be there.

Follow the steps listed below to reset the iPad network settings:

Step 1: Open the "Settings" menu on the iPad.

Step 2: Go to the "General" option.

Step 3: Scroll down to find the "Reset" tab and tap on it.

Step 4: Select the "Reset Network Settings" option. If you want to reaccess the wireless network, re-enter the network's information.

Solution 10: Fix Not Connecting iPad Wi-Fi Issues Due to System Error

Dr.Fone - System Repair

Repair iOS System Errors Without data loss.

• Only fix your iOS to normal, no data loss at all.
• Fix various iOS system issues stuck in recovery mode, white Apple logo, black screen, looping on start, etc.
• Downgrade iOS without iTunes at all.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS 15.

Available on: Windows Mac

Start Download

Start Download

3981454 people have downloaded it

Still, your iPad won’t connect to Wi-Fi? There might be a system error. Use the effective system repair tool to solve the issue with a single click. Dr.Fone System Repair(iOS) can quickly fix this common issue. Moreover, it will not cause any harm to the existing data on your device. Follow the steps to resolve this problem using Dr.Fone - System Repair tool:

Step 1: Download the Dr.Fone app on your computer and install it.

Step 2: Launch Dr.Fone on your system. Then, hit on the "System Repair" option.

Step 2: When you enter the System Repair module, you will notice two optional modes to fix the iPad won’t connect Wi-Fi issue. Click on the "Standard Mode."

Step 3: Choose the correct iOS version in the pop-up window to download its firmware. Then, tap on the "Start" button.

Step 4: Dr.Fone - System Repair (iOS) will download the firmware for the device. Ensure that iPad is connected to the computer throughout the process and maintain a stable connection.

Step 5: After downloading the firmware, click on the "Fix Now" button. Then, the application will fix the iPad system error.

Step 6: The iPad will restart after the process.

Step 7: Disconnect the iPad safely. Then, connect it to Wi-Fi again.